- SHOP
Buyer Support
Get in touch 24/7
Total Security
Secure checkout
- 3D Printer
- LEGO
- Sensors
- Toys
- New ProductsNew
- RESOURCESNew
3D Printer Nozzel
Compatible with most 3D Printers like Anet A8
Arduino Uno
The Arduino UNO is a widely used open-source microcontroller board based on the?ATmega328P?microcontroller and developed by?Arduino.cc.
Hot Bed line
It is Suitable for A8 A6 3D printer heated bed.
Extruder set
Complete replacement for Anet A8 3D printers (all models)
Anet A8 Display
2004 LCD smart controller for 3D printer
PLA Filament (Yellow)
3D Printer Filament, Dimensional Accuracy /- 0.03 mm, 1 kg Spool, 1.75 mm, Yellow
• 1 KG (approximately 2.20 lbs) Spool
• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
• Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)
• Spool Diameter: 7.88″ – Spool Width: 2.69″ – Spool Hub Hole Diameter: 2.20
PLA Filament (Red)
3D Printer Filament, Dimensional Accuracy /- 0.03 mm, 1 kg Spool, 1.75 mm, Red
• 1 KG (approximately 2.20 lbs) Spool
• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
• Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)
• Spool Diameter: 7.88″ – Spool Width: 2.69″ – Spool Hub Hole Diameter: 2.20
PLA Filament (Green)
3D Printer Filament, Dimensional Accuracy /- 0.03 mm, 1 kg Spool, 1.75 mm, Green
• 1 KG (approximately 2.20 lbs) Spool
• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
• Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)
• Spool Diameter: 7.88″ – Spool Width: 2.69″ – Spool Hub Hole Diameter: 2.20
PLA Filament (Silver)
3D Printer Filament, Dimensional Accuracy /- 0.03 mm, 1 kg Spool, 1.75 mm, Silver
• 1 KG (approximately 2.20 lbs) Spool
• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
• Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)
• Spool Diameter: 7.88″ – Spool Width: 2.69″ – Spool Hub Hole Diameter: 2.20
PLA Filament (Fluorescent Green)
3D Printer Filament, Dimensional Accuracy /- 0.03 mm, 1 kg Spool, 1.75 mm, Fluorescent Green
• 1 KG (approximately 2.20 lbs) Spool
• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
• Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)
• Spool Diameter: 7.88″ – Spool Width: 2.69″ – Spool Hub Hole Diameter: 2.20
PLA Filament (Fluorescent Rose)
3D Printer Filament, Dimensional Accuracy /- 0.03 mm, 1 kg Spool, 1.75 mm, Fluorescent Rose
• 1 KG (approximately 2.20 lbs) Spool
• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
• Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)
• Spool Diameter: 7.88″ – Spool Width: 2.69″ – Spool Hub Hole Diameter: 2.20